Drip Feed NC Part Programs down to your machine!

The CAMCom DNC system is NT-based and connects to any NC/CNC machine. Now you can drip feed to any of your CNCs. CAMCom DNC uses low-cost, highly reliable, off-the-shelf components for easy expansion, economy, and maintenance.

CAMCom DNC is a powerful shop floor communications solution to provide you with fast, reliable and easy data transfers to your machine tools. Easily configured to any serial port, or use our optional BTRs to eliminate your tape readers and allow serial transfers rather than tape.  Get the BIG picture using the status viewer. The status viewer allows you to view the status of all ports. With the built in transfer logger, you can examine the activity of your NC/CNC machines from any terminal.

CAMCom DNC Systems real-time response means you can:

Quick Start

Gives you high speed block search to enable you to start in the middle of programs! Header packets will automatically be added to the start of the transfer so the NC/CNC thinks it is just another program..

Say "good bye" to tape - in every way.

No tape errors, no changing reels, no tape storage, and no tape limitations !!!

Save Benching Time.

Cut finer sections through contoured surfaces, reduce hand finishing - all without worrying about the size of your program.
Rejuvenate NC machines ! Enhance CNC machines ! CAMComs capability lets you run big programs on old machines. (Drip Feed) It also has powerful software options for part rotation, scaling, mirroring, block search and program viewing!

No waiting! No slowdown!

Multi-tasking ability lets you download to multiple machines simultaneously without bottlenecks and the typical slowdown at the machine tool.

Modular Design

Both the software and hardware were designed in modules so that you purchase only the modules right for you. You can add modules as your needs change.

Optional Automatic Machine Dependent Post Processors

Post processor modules are available to convert your standard APT, ACL, 274-D or BCL input files to the format required by your machine. Conversion occurs automatically when a transfer request is initiated. This allows you the maximum part scheduling flexibility without worrying about converting the data for a particular machine. If the machine breaks... just send the data to another one!

Optional Part Program Viewer

View the part program data before you cut it !!! See needed changes before you cut your parts. You can zoom, rotate and pan through the program data so that what you see is what you get.